background image

3

1.4   What are the service intervals?

Every 24 months

we advise you to do maintenance service 

(water resistance, movement accuracy 

test).

Every 5 years

we advise you to do a complete mainte-

nance service (complete movement revi-

sion, water resistance, accuracy and 

functionality complete revision).

Who should I contact for a 

maintenance service or battery 

replacement?

We recommend that you contact an au-

thorized Edox retailer, as they are the only 

certified specialists equipped with the 

tools and apparatus required carrying out 

the work and the necessary checks in a 

professional  manner.  Furthermore,  only 

these certified specialists can guarantee 

that their work is carried out in accord-

ance with Edox’ strict quality standards. 

Make sure that right after each battery 

change the watch has been water-re-

sistant tested.

1.5  Environmental protection

Collection and treatment of end of life 

Quartz watches*

This product should not be disposed of 

with household waste. It has to be re-

turned to a local authorized collection 

system.  By  following  this  procedure  you 

will contribute to the protection of the en-

vironment and human health. The recy-

cling of the materials will help to conserve 

natural resources.

*valid  in  EU  member  states  and  in  any 

countries with corresponding legislation.

2.  PRECISION TOLERANCES

Mechanical watches

The mechanical Edox watch with an auto-

matic movement does not need to be 

wound by hand. 

The motion of your wrist makes the rotor 

(oscillating weight or mass) turn, thereby 

winding up the mainspring of the watch 

movement. 

The everyday activity of life is sufficient in 

itself to wind up an automatic Edox watch 

and it will run continually, even if it is re-

moved at night. However, if not worn for 

approximately 40 hours, it will stop. To 

make the watch work again, turn the 

crown clockwise about 20 times. Now set 

the time and if possible the date, etc.

2.1  Mechanical watches accuracy

Depending on the movement, the daily 

tolerance of a mechanical watch can be of 

30 seconds. If you notice a bigger toler-

ance rate, you can have your watch ad-

justed at a service center in your country, 

free of charge within the guarantee peri-

od.

2.2   Chronometer watches accuracy

Every Edox Chronometer comes with a 

rating certificate issued after an official 

test  by  the  Swiss  Official  Chronometer 

Testing Institute (COSC). The accuracy of 

the watch movement is tested electroni-

cally at the COSC during 15 days in differ-

ent positions and at different 

temperatures. The average daily rating 

must not exceed -4/+6 seconds per day.

Only Edox watches which have success-

fully  undergone  the  official  COSC  rating 

procedure qualify as chronometers.

3.   GENERAL INFORMATIONS

3.1  Helium escape valve

Decompression system which allows he-

lium to escape from inside the watch 

when the watch is worn for professional 

use  in  pressure  chambers.  (Long-term 

underwater work, crude oil exploration, 

etc.)

Important: The Edox helium valve opens 

and closes automatically (for the models 

wearing  the  new  automatic  Helium  es-

cape valve). The models wearing a non-

automatic Helium escape valve must have 

the valve screw down in order to guaran-

tee the water resistance of the watch. 

Unscrew the Helium escape valve only to 

release the gas from the watch. Do not 

unscrew it under water in order to prevent 

water entering the mechanism.

3.2  Tachymeter scale 

Some Edox Chronograph watches have a 

tachymeter scale. With this scale it is pos-

sible to measure the speed. The distance 

is  1  km.  To  measure  the  elapsed  time 

press the start/stop button when the vehi-

cle (power-boat) passes the starting and 

the final point or target. The figure shown 

by the hand on the tachymeter scale indi-

cates the average speed in kilometers. If 

for instance a car covers a 1 km distance 

in 30 seconds, you can consider it to an 

average speed of 120 km per hour.

Summary of Contents for Watch














Reviews: