background image

12

• Press A to start the countdown.

• Press B to stop the countdown.

Important note

: once the countdown 

has been stopped, it cannot be restarted. 

Pressing A and B for more than 5 seconds 

restarts this mode.

Chronograph display (Chrono mode):

• Press push-piece C to position Hand 4 

in Chrono mode.

• Press push-piece A to start the 

chronograph (intermediate time).

• Press push-piece B to stop the 

chronograph.

• Press push-piece B to reset the 

chronograph to zero.

Intermediate time:

• Press push-piece A to start the 

chronograph.

• Press push-piece A to display the time 

of the first race.

• Press push-piece A to return to the 

timing.

• Press push-piece B to stop the 

chronograph.

• Press push-piece B to reset the 

chronograph to zero.

Manually resetting Race and Replay 

modes to zero:

• Press push-piece C to position Hand 4 

in Replay mode.

• Press push-pieces A and B 

simultaneously for 5 seconds. The 

times recorded in Race and Replay 

modes are reset to zero (the total 

accumulated time in Total Time mode 

remains recorded).

Manually resetting Total Time mode 

to zero:

• Press push-piece C to position Hand 4 

in Total Time mode.

• Press push-pieces A and B 

simultaneously for 5 seconds. The total 

accumulated time in Total Time mode 

and the Race and Replay modes are 

reset to zero.

Adjusting the hands:

Push-piece  A  enables  you  to  adjust  the 

various hands.

Push-piece B enables you to change the 

hand to be adjusted.

• Press push-piece C to position Hand 4 

in Time mode.

• Pull push-piece C.

• Press push-pieces A and B 

simultaneously for 5 seconds. Hands 1 

and 2 will position themselves at 12h.

• Press push-piece A to adjust Hand 1.

• Press push-piece B to change hands. 

The next adjustment will be Hand 2.

• Press push-piece A to adjust Hand 2.

• Press push-piece B to change hands. 

The next adjustment will be Hand 3.

• Press push-piece A to adjust Hand 3.

• Press push-piece B to change hands. 

The next adjustment will be Hand 4.

• Press push-piece A to adjust Hand 4.

• Press push-piece B to change hands. 

The next adjustment will be Hand 5.

• Press push-piece A to adjust Hand 5.

Important note

: To go directly from one 

mode to another, simply press push-piece 

B the number of times necessary to adjust 

the desired hand.

Good to know:

 it is possible to wind back 

the 3 sub-counter hands (hand 3, 4 and 5) 

by pressing push-piece A for 2 seconds.

• Press push-piece C to return to Time 

mode.

4.7   How to shorten a rubber strap

Remove the steel buckle and spring bar

 

With a sharp blade, cut the necessary ex-

tra rubber piece off

 

Put the steel spring bar and buckle back 

on

2

A

C

B

1

4

Summary of Contents for Watch














Reviews: