EDNord magicolor 2500W User Manual Download Page 34

Page: 34 / 108

Media Types

Adhesive

Folded, creased, curled, embossed, warped, or wrinkled

Perforated, three-hole punched, or torn

Too slick, too coarse, or too textured

Different in texture (roughness) on the front and back

Too thin or too thick

Stuck together with static electricity

Composed of foil or gilt; too luminous

Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])

Irregularly shaped (not rectangular or not cut at right angles)

Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

Acidic

Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m

(24 lb bond) is referred to as thick stock. Test all

thick stock to ensure acceptable performance and to ensure that the image
does not shift.

43 lb bond is also referred to as 90 lb index stock.

DO NOT use thick stock that is

Mixed with any other media in the trays (as this will cause printer misfeed-
ing)

Capacity

Tray 1

Up to 50 thick stock sheets, depending on
their thickness

Orientation

Face up

Driver
Media Type

Thick stock (91 to 163 g/m

)

Weight

91 to 163 g/m² (25 to 43 lb)

EDNord - Istedgade 37A - 9000 AAlborg - telefon 96333500

Summary of Contents for magicolor 2500W













































































































Search results

Summary of Contents for magicolor 2500W

Reviews:

Related manuals for magicolor 2500W

Brands by name

Popular brands

EDNord magicolor 2500W, User Manual

Search results

Summary of Contents for magicolor 2500W

Reviews:

Related manuals for magicolor 2500W

Brands by name

Popular brands