EDNord magicolor 2450 User Manual Download Page 97

Page: 97 / 168

Replacing Consumables

You can identify the toner cartridge by the color of the handle and
by the letter molded into the handle: C (cyan), M (magenta), Y (yel-
low) and K (black).

Pull the handle on the toner car-
tridge toward you, and then pull
the toner cartridge up to remove
it.

Do not manually rotate
the toner cartridge carou-
sel. In addition, do not
rotate the carousel with
force; otherwise it may be
damaged.

Note

Dispose of the empty toner cartridge according to your local
regulations. Do not burn the toner cartridge.

Prepare a new toner cartridge.

Shake the cartridge a few times
to distribute the toner.

Make sure that the toner
roller cover is securely
attached before shaking
the toner cartridge.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for magicolor 2450









































































































































































Search results

Summary of Contents for magicolor 2450

Reviews:

Related manuals for magicolor 2450

Brands by name

Popular brands

EDNord magicolor 2450, User Manual

Search results

Summary of Contents for magicolor 2450

Reviews:

Related manuals for magicolor 2450

Brands by name

Popular brands