manualshive.com logo in svg

EDNord magicolor 2450, User Manual, Page: 63 / 168

Share
Download
EDNord magicolor 2450 User Manual Download Page 63

Configuration Menu Overview 

49

SERVICE MENU

With this menu, the service representative can adjust the printer and perform 
maintenance operations. This menu cannot be used by the user.

CAP-

TURE 

PRT 

JOB

Settings

OFF

/ON/PRINT

Select whether or not received print jobs are saved on the hard 
disk.

If 

OFF

 is selected, print jobs are not saved on the hard disk.

If 

ON

 is selected, received print jobs are saved on the hard disk 

without being printed.

If 

PRINT

 is selected, received print jobs are printed and saved 

on the hard disk.

FORMAT FORMAT 

FLASH

Settings

NO

/YES

Select whether or not to initialize the flash RAM.

If 

YES

 is selected, the flash RAM is initialized.

FORMAT 

DISK

Settings

NO

/YES

Select whether or not to initialize the hard disk.

If 

YES

 is selected, the hard disk is initialized.

RESTORE 

/SAVE

RESTORE 

FACTORY

Settings

NO

/YES

Select whether or not all menu items are reset to 
their initial settings.

If 

YES

 is selected, all menu items are reset to their 

initial settings.

SAVE 

CUSTOM

Settings

NO

/YES

Select whether or not all changed menu settings are 
saved.

If 

YES

 is selected, all changes are saved.

RESTORE 

CUSTOM

Settings

NO

/YES

Select whether or not menu items are reverted to 
the previously saved settings.

If 

YES

 is selected, the menu items revert to the 

previously saved settings.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for magicolor 2450









































































































































































Reviews:

No comments