Max. 10 programs can be stored in this way, e.g.:
No. Speed
rpm
Time
P0 200 35
sec.
P1 450 10
sec.
P2
0 *
1 min
P3 300 15
min
P4 100 1
hour
P5 150 5
min
P6 300 3
hours
P7 400 2.20
min
P8 250 1.40
min
P9 180 3
min
* In mode C the speed can also be „0“, i.e. the device pauses for the set time.
2. Step:
Definition of the program flow
When the required ‘programs’ are stored (you can, of course also store only 2 or 5 ‘programs’), a
program flow is selected.
Press
key
▲
or
▼
until „Add“ appears on the display.
Select
that
‘program’
which shall run first, e.g. P5.
Confirm
with
OK,
then
select the next ‘program’, and confirm again
with
OK.
In this way max. 5 ‘programs’ can be lined up.
532
Now you can choose whether this program flow shall run once, or
whether it shall be repeated endlessly.
Press
key
▲
or
▼
until „yes“ or „no“ appears.
Yes
With the control knob you can choose:
no -> Program flow will not be repeated
yes -> Program flow will be repeated endlessly
(If „YES“ the symbol = appears in the display)
Confirm
the
selection
with
OK.
Press
key
▲
or
▼
until „RUN“ appears in the display.
532
Press OK key to start the shaker.
flashes
✴
flashes
✴
Add
Add
32
RPT
RUN
=
✴
=
flashes
✴
flashes
32
--PO
- - -
Edmund Bühler GmbH ALLGEM\BED.SMG/BEDSME/TXTE.DOC – 01/08
15
