Version of 26 April 2016
25
Note:
You may occasionally receive an error message. This usually happens when you have selected the
wrong start time or date. Check your settings!
Note:
Please note that the recording is performed successfully only when a suitable USB memory device is
also connected with the receiver at the scheduled time.
Miscellaneous settings
Channel list num:
Channel list
number setup
Automatic subtitles:
Here you
can set the options for subtitles
display.
Automatic deactivation of
the receiver
Here you can set
a time period in minutes, after
which the receiver switches to
standby mode.
Standby Mode:
Set ‘Real’ or
‘Fake’
Duration of information
display:
Here you can set the
duration of information display
Location:
You can define the location where the information will be displayed.
Default Setting
Select one of the following menu
items with the
up/down arrow
buttons
and press the
OK
button
.
Factory default:
This item
resets the receiver, in terms of
software, to its factory defaults.
After pressing the OK button,
you are asked to enter your PIN.
Then a window appears with a
warning message.
Delete all channels:
This item enables deleting all channels (settings).
VFD display in standby to ‘OFF’ 0.8W mode:
Specify whether the receiver’s power consumption will be
just 0.8 Watt when in standby mode. If this item is set to ‘Off’, then the VFD display in standby mode is
deactivated and power consumption is reduced to 0.8 Watt. If you wish the power consumption to be set to
zero, you have to turn off the receiver from the switch in the back.
You can exit the 'Factory Default' menu pressing the EXIT button.
