7
1.
If you have a high definition television set, you should use a HDMI cable for best result, Plug one end of the
cable into the HDMI socket on the receiver, and the other end into the matching socket on your television. In
this case, you do not have to make audio connections because the HDMI connector can output stereo audio or
Dolby Digital audio.
2.
Connect one end of RCA cable to the RCA jack on the back of the receiver and the other end to a
RCA jack on your TV.
Finally connect the coaxial cable from the LNB of your Dish to the LNB IN jack on the receiver.
With External Audio / Hi-Fi System
To connect any external Audio Hi-Fi system, the receiver has been provided with RCA connector at the back of the
receiver marked with AV OUT.
Connect an RCA cable from the AV OUT jack on the back of the receiver to the LINE, AUX, SPARE OR EXTRA input
jacks on your Hi-Fi System.
7.1 TV with Motorized System (DiSEqC 1.2)
Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or
Receiver connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2 motor.
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible.
This allows multiple antennas to be connected to the receiver at the same time.
If you have two or more fixed antennas or LNBs, then we recommend you use a DiSEqC 1.0
Switch.
Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.
Do the same for any other LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch,
Connect the other end to the LNB IN socket on the receiver.
To the digital receiver, you can connect either a single satellite antenna directly or LNB of
Multi-feed equipment.
7.2 Connecting the Network
1. Connecting to the LAN:
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
2. Connecting to the Wi-Fi (Wireless LAN):
You can connect the network via the Wi-Fi access point or DSL/cable modem.
a.
Plug in the wireless USB dongle to the USB port.(Separate purchase required)