21
2
This menu you may assign a dynamic IP address
to the digital receiver. To do so, select the DHCP
On.
3
If you have a static IP address, unselect the DHCP
Enable, then the IP Address, Subnet Mask,
Gateway and DNS options become enabled. You
have to set these options according to your IP
address.
4
WiFi Manager
Insert WiFi equipment first, then search
available
Enter net signal, input the password to connect
with network.
5
3G Network
a) When you inset the 3G dongle, the screen will
display a message like “3G Device plug in
“after 14 seconds and will auto connect 3G
Network. you will see picture like the below
b) In this menu, you can press [OK] key select
3G Dial setting, Press [OK] key to select
connect to network or disconnect the network
11.4 Time Setting
When you enter to “Local Time Setting” menu, you will
see the screen like below:
GMT Usage: This item is use for open the usage of
GMT. You can press [Left/Right] keys to switch
“On/Off”.
The “GMT Offset” item is valid only when the setting
of “GMT Usage” is “Yes”. You can press [Left/Right]
keys to switch “GMT Offset” value and the range
are “-12:00 ~ +12:00” increase each half hour
progressively.
You can press [Left/Right] to control Summer time
on or off.
“Date” and “Time” items are valid only when the
setting of “GMT Usage” is “No”. You can press
[Left/Right] keys to moving highlight and use
number keys to input directly.
If the current channel provides the correct time
information, you will see the current time while you
enter “Time” menu. If the channel doesn’t provide
time information, you have to input the date and
time information manually.
Press [Menu] key to draw back from “Local Time
Setting” Menu.
11.5 Timer
Press [OK] key to open timer menu.
Current time information will display on the first
column; if the current time is incorrect, please modify
the time information in “Time” item.
Timer Number: You can press [Left/Right] keys to set
Timer number, and there are 8 timers in total.
Timer Mode: There are several modes for Timer to
setting, include Off, Once, Daily, Weekly, Monthly
and Yearly.
Timer Service: There are two options for “Timer
Service”, include “TV Channel” and “Radio Channel”
(timer setting for channel change and
Wakeup/Sleep) and Message (reminding message).
When you select “Channel” (timer setting for channel
change and Wakeup/Sleep) option in “Timer
Service”, the screen will display like below: