Edirol V-8 Owner'S Manual Download Page 93 | Manualshive

Page: 93 / 116

background image

93

Input/output

settings

Intr

oduction

Connections

Basic operation

Switc

hing ima

g

es

Eff
ects

BPM sync

External de

vices

Video fader

Appendices

MIDI Implementation

(continued)

3. Parameter Address Map

■

3-1. V-8 (Model ID = 00H 00H 28H)

* Addresses marked by # are sent as two bytes; an upper nibble (upper 4 bits) and lower nibble (lower 4 bits).

Example) If the original data is BCH, 0BH is transmitted as the first byte.

The next byte transmitted is 0CH. For reception, this is ignored if two bytes are not received together.

* Do not transmit data to the address whose Parameter Name is “Reserve”.
* The factory-default Device ID is 10H.

+----------------+----------------------------------------------+
| Start Address | Description |
+----------------+----------------------------------------------+
| 00H 00H 00H | System Common Preference Area (See 3-1-1) |
| 01H 00H 00H | Fader Control Preference Area (See 3-1-2) |
| 02H 00H 00H | Effects Control Preference Area (See 3-1-3) |
| 03H 00H 00H | Reserved Area |
| 12H 00H 00H | Fader Control Parameter Area (See 3-1-4) |
| 20H 00H 00H | Bulk Dump Area (See 3-1-5) |
+----------------+----------------------------------------------+

●

3-1-1. System Common Preference

+---------------+-----------------------+----------------+-----------------------+
| Address | Parameter Name | Sys.Ex.Value | Meaning of Value |
+---------------+-----------------------+----------------+-----------------------+
| 00H 00H 00H | MIDI Transmit Channel | 00H - 0FH | 1 - 16 Ch. |
| 00H 00H 01H | MIDI Receive Channel | 00H - 10H | 1 - 16 Ch., OFF |
+---------------+-----------------------+----------------+-----------------------+

●

3-1-2. Fader Control Preference

+---------------+---------------------------------------+---------------------+-------------------------------------------------------+
| Address | Parameter Name | Sys.Ex.Value | Meaning of Value     |
|===============|=======================================|=====================|=======================================================|
|#01H 10H 00H | Tx/Rx Setting (Input Select A Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, Program Change (bank.1) |
|#01H 10H 02H | Tx/Rx Setting (Input Select B Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, Program Change (bank.129) |
|#01H 10H 04H | Tx/Rx Setting (FADE A Switch Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 06H | Tx/Rx Setting (FADE B Switch Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 08H | Tx/Rx Setting (Control A Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 0AH | Tx/Rx Setting (Control B Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 0CH | Tx/Rx Setting (Video Fader Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 0EH | Tx/Rx Setting (Transition Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 10H | Tx/Rx Setting (Transformer A Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 12H | Tx/Rx Setting (Transformer B Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 14H | Tx/Rx Setting (BPM SYNC Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 16H | Tx/Rx Setting (Transition Time Assign)| 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 18H | Tx/Rx Setting (BPM CONTROL Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 1AH | Tx/Rx Setting (Output Fade Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 1CH | Tx/Rx Setting (White/Black Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 1EH | Tx/Rx Setting (PC Input Select Assign)| 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 20H | Tx/Rx Setting (Preview Output Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF     |
|#01H 10H 22H | Tx/Rx Setting (Memory Assign) | 01H-05H,07H-1FH, | Control Change,    |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, Program Change (bank.10241)|
+---------------+---------------------------------------+---------------------+-------------------------------------------------------+

●

3-1-3. Effects Control Preference

+---------------+---------------------------------------+---------------------+--------------------------------+
| Address | Parameter Name | Sys.Ex.Value | Meaning of Value |
|============== |=======================================|=====================|================================|
|#02H 10H 00H | Tx/Rx Setting (Effect-A1 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 02H | Tx/Rx Setting (Effect-A2 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 04H | Tx/Rx Setting (Effect-A3 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 06H | Tx/Rx Setting (Effect-A4 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 08H | Tx/Rx Setting (Effect-B1 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 0AH | Tx/Rx Setting (Effect-B2 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 0CH | Tx/Rx Setting (Effect-B3 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
|#02H 10H 0EH | Tx/Rx Setting (Effect-B4 Assign) | 01H-05H,07H-1FH, | Control Change, |
| | | 40H-5FH,D0H,E0H,FFH | Channel Press, Pitch Bend, OFF |
+---------------+---------------------------------------+---------------------+--------------------------------+

●

3-1-4. Fader Control Parameter

+---------------+-----------------------+---------------+-----------------------+
| Address | Parameter Name | Sys.Ex.Value | Meaning of Value |
|===============|=======================|===============|=======================|
| 12H 00H 00H | ----- | ----- | ----- |
| 12H 00H 01H | Note Mode | 00H - 01H | OFF, ON |
+---------------+-----------------------+---------------+-----------------------+

●

3-1-4. Bulk Dump Parameter

+---------------+-----------------------+---------------+-----------------------+
| Address | Parameter Name | Sys.Ex.Value | Meaning of Value |
|===============|=======================|===============|=======================|
| 20H 00H 00H | ----- | ----- | ----- |
| : | : | : | : |
| 2FH 7FH 00H | ----- | ----- | ----- |
+---------------+-----------------------+---------------+-----------------------+

V-8_e.book 93 ページ２００８年５月１５日　木曜日　午後１時１１分

«
...
91
92
93
94
95
...
»

Summary of Contents for V-8





















































































































Reviews:

No comments

Related manuals for V-8

Brand: VOX electronics Pages: 67

Brand: Pronomic Pages: 4

Brand: Fantini Rubinetti Pages: 16

Brand: Doyon Pages: 21

Brand: HAEGER Pages: 32

Brand: Myria Pages: 15

Brand: IMG STAGELINE Pages: 24

Brand: IMG STAGE LINE Pages: 18

Brand: IMG STAGE LINE Pages: 26

Brand: Homemaker Pages: 13

Brand: ALLEN & HEATH Pages: 12

Brand: ALLEN & HEATH Pages: 24

Brand: Chicago Electric Pages: 14

Brand: Taramps Pages: 20

Brand: Denon Pages: 104

Brand: Wheatstone Corporation Pages: 45

Brand: PASGAO Pages: 6

Brand: Rane Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands