17
Using the R-09
The R-09 uses an SD memory card.
Insert the supplied SD memory card.
■
Inserting
1.
Check that the power is turned off.
If the power is on, turn it off. Press and hold the [POWER
switch] on the R-09 to turn power on or off.
2.
Open the [Bottom Cover] on the bottom of
the unit.
fig.sdin-2.eps_60
1. Turn the R-09 over.
2. Slide the [Bottom Cover] up.
The cover will stop when the [USB Terminal] and [Memory Slot]
can be seen.
* Forcing the cover open may damage the unit.
fig.sdin-3-e.eps_60
3.
Insert the memory card.
Insert the memory card.
• When inserting the memory card, make sure the reverse side of
the card is facing up and insert the card slowly. If the card is
forcibly inserted incorrectly, the R-09 or the memory card may
be damaged. Please exercise caution.
• Carefully insert the memory card all the way in—until it is firmly
in place.
fig.battery-4.eps_60
4.
Close the [Bottom Cover].
Preparing the memory card
Inserting
2.
Back side
R-09_e.book 17 ページ ２００７年２月１３日 火曜日 午後３時２７分
