Edimax IC-3030i User Manual Download Page 66

Page: 66 / 127

2.4.3 Utilities

This menu allows you to upgrade firmware, clear all settings, reboot the IP

camera, and switch LED lights on/off.

The descriptions of every setting in this menu will be given below:

Item

Description

Upgrade

Firmware

If you downloaded latest firmware file from our website,

you can click

‟Browse‟ button to pick a firmware file

located on your computer

‟s hard drive and you can

upload the firmware file to the IP camera later.

After you selected a proper firmware file from your

computer, click

„Upgrade Firmware‟ button to start

upgrade. DO NOT DISCONNECT NOW!

If the firmware file you provided is invalid of you didn

‟t

provide the firmware file, you

‟ll be prompted to select

another valid firmware file again.

The IP camera will reboot after the upgrade procedure is

done.

PLEASE NOTE THAT THE IP ADDRESS OF THE

CAMERA WILL RESET TO DEFAULT VALUE:

192.168.2.3

Reset to Factory

Defaults

Clear all settings in the camera. Please think again

before you do this, and then click this button to reset all

settings.

NOTE: IP address will be reset to default value
‘192.168.2.3’ also. You’ll need to change the IP address

Summary of Contents for IC-3030i
































































































































Search results

Summary of Contents for IC-3030i

Reviews:

Related manuals for IC-3030i

Brands by name

Popular brands

Edimax IC-3030i, User Manual

Search results

Summary of Contents for IC-3030i

Reviews:

Related manuals for IC-3030i

Brands by name

Popular brands