117
4.4
Use this IPCAM with a router or firewall
If this IPCAM is not directly connected to Internet (behind router or firewall),
you
‟ll need to setup your router / firewall so you can access this IPCAM from
other computers on Internet.
The following instruction describes how to configure your router or firewall
device so your IPCAM can work with them. These instructions are based on a
commonly-available residential router and these setup techniques should be
easy to apply on any other similar devices as well.
4.4.1 Setup Dyndns Dynamic IP address Mapping
1. Go to your router
‟s setup page, and locate „DDNS‟, „Dynamic DNS‟, or
similar setup item.
2. Refer to last chapter and obtain a Dyndns account, password, and domain
name.
Summary of Contents for IC-3030i
