95
3-3-1-4 Motion Record
With this function activated, only motions captured by the camera will be
recorded, so you don‟t have to waste hard disk storage space on images you
don‟t need to pay attention to.
Here are the descriptions of all setting items:
Item
Description
Channel
Select the channel number you wish to set.
Enable
Enable motion record function.
Disable
Disable motion record function.
Recording Time
Select the time duration that camera will record when a
motion has been detected from dropdown menu in
seconds.
Invoke alarm
when motion is
triggered
Send an alarm when a motion has been detected by the
camera.
Send mail when
Send an email to a pre-defined address when a motion
WARNING: For applications that security is highly concerned, it
’s not
recommended to use this function since some tiny changes you may
need to know may not be able to trigger the camera and the camera
will not start recording.
Интернет-магазин TELECAMERA.RU
Summary of Contents for IC-3030
