background image

39 

 

Notice According to GNU General Public License Version 2 

 
This product includes software that is subject to the GNU General Public License version 2. The program is free software and 
distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more 
than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source 
code. 
 
Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das Programm ist eine sog. „Free 
Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen 
Zeitraum von drei Jahren an, eine vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu 
stellen – zu nicht höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen. 
 

GNU GENERAL PUBLIC LICENSE 

Version 2, June 1991 

 
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA 
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. 
 

Preamble 

 
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General 
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free 
for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other 
program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser 
General Public License instead.) You can apply it to your programs, too. 
 
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make 
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive 
source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that 
you know you can do these things. 
 
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender 
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you 
modify it. 
 
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights 
that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms 
so they know their rights. 
 
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal 
permission to copy, distribute and/or modify the software. 
 
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for 
this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they 
have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations. 
 
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a 
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have 
made it clear that any patent must be licensed for everyone’s free use or not licensed at all. 
 
The precise terms and conditions for copying, distribution and modification follow. 
 

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 

 
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be 
distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a 
‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work 
containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. 
(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“. 
 
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The 
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a 
work based on the Program (independent of having been made by running the Program). Whether that is true depends on 
what the Program does. 
 
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that 
you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep 

Summary of Contents for BR-6473AX












































Reviews: