PAGE 9
EdilKamin Installation Clearances & Specifications
Installation Clearances
Minimum clearances shown are in mm, and all figures for
clearances are to combustible materials. All EdilKamin pellet
fires are tested using all applicable procedures and equipment
under AS/NzS2918:2001.
Rear Clearance Options
The 100mm rear clearance measurement “4” is based on the
EdilKamin pellet fire having the vent system penetrating the
rear wall behind the pellet fire and is the minimum clearances
required for this type of installation.
Please Note: If the vent system is going to be visible in the room and exit
through the ceiling, a minimum clearance of 80mm is required from the rear
surface of the vent system to a combustible wall. A 250mm rear clearance
is therefore recommended. Also consider the thickness of the scotia as this
will determine how close the vent can be to the wall.
Optional Direct Vent Combustion Air Supply
The EdilKamin pellet fires have a direct vent option which
when installed draws the combustion air from outside the
home, further improving the efficiency of the pellet fire. This is
recommended as the Iris Plus and Little pellet fires can use up
to 24 cubic metres of room air every hour.
There are three methods of supplying the pellet fire with
combustion air. They are as follows;
• DV WALL KIT ducts through an outside wall
• DV FLOOR KIT ducts through the floor directly behind the fire
• DV CEILINg KIT ducts into the wall and up into the ceiling
cavity
If using a thru wall exhaust vent in combination with a DV
air intake kit, be sure to offset the DV air hole approximately
50mm to allow for the external flashings, this will vary
depending on type of kit used.
Warranty
Your EdilKamin Pellet fire is covered by a full 12 month
warranty, and a three year firebox warranty. This warranty is
subject to the unit being operated and maintained as detailed
in the operation manual.
100/250mm*
200mm
200mm
530mm
1
200mm
200mm
490mm
1
5
5
800mm
8
4
4
200mm
5
9
9
160mm
EdilKamin Iris Plus
600
950
530
140kg
8kW
Yes
0.61
70.6%
EdilKamin Little
480
940
470
136kg
5kW
Yes
0.38
73.8%
Model Clearances
1
2
3
4
5
6
7
8
9
EdilKamin Iris Plus
200
77
106
100/250*
200
320
375
800
160
EdilKamin Little
200
77
106
100/250*
200
315
370
680
160
*Please Note: Measurement 4 details the vent system using a wall or ceiling kit. 100mm = Vent through wall, 250mm = Vent through ceiling.
790/940mm
830/980mm
100/250mm*
680mm
8
IRIS PLUS (REAR PROFILE)
600mm
375mm
320mm
215mm
106mm 77
3
7
6
LITTLE (REAR PROFILE)
480mm
315mm
160mm
134mm 106
3
2
7
6
IRIS PLUS
LITTLE
IRIS PLUS/LITTLE
CORNER INSTALLATION
950mm
2