page 4
2A FUSE
AUX
2A FUSE
I/O CONSOLE
RS232
RS485
VENTILATION
ADJUSTMENT
P/TEMP
ADJUSTMENT
FLOW
SENSOR
ROOM
SENSOR
SCREW
FEEDER MOTOR
230V AC MAINS
50Hz +/- 10%
IgNITION HEATINg
ELEMENT
THERMOCOUPLE
VENTILATION
SMOKE
EXTRACTION
MOTOR
SMOKE SPEED
SAFETY
THERMOSTAT
Technical Specifications (Iris Plus & Little models)
IRIS PLUS & LITTLE MODELS (SAFETY DEVICES)
Thermocouple:
Placed at the smoke outlet to detect the temperature,
turns the pellet fire on and off and controls its operation based on
defined parameters.
Air flow sensor:
Installed at the intake duct, it trips when the
combustion air flow is not correct, causing low pressure problems in the
smoke circuit.
Safety thermostat:
Trips when the temperature inside the pellet fire is
too high. It stops pellet loading, causing the pellet fire to shut down.
IRIS PLUS & LITTLE MODELS (ELECTRICAL SPECIFICATIONS)
Power supply
/-10% 50 Hz
0/1 switch
yes
Average power consumption
150 W
Power consumption during ignition
400 W
Remote control frequency (optional)
infrared
Electronic circuit board protection
5 x 20 2 A 250 VAC fuse
IRIS PLUS (TECHNICAL & HEATING SPECIFICATIONS)
Hopper capacity
15kg
Efficiency
71%
Heat Output
3.4/8kW
Burn time (min/max)
7.5/17 hours
Fuel consumption
0.9/2.0 kg/h
Heatable room dimensions
150m2
Weight
140kg
Smoke duct diameter (male)
80mm
Air intake duct diameter (male)
40mm
LITTLE (TECHNICAL & HEATING SPECIFICATIONS)
Hopper capacity
15kg
Efficiency
73.8%
Heat Output
3.4/5kW
Burn time (min/max)
10/30 hours
Fuel consumption
0.5/1.45 kg/h
Heatable room dimensions (min/max)
120m2
Weight
136kg
Smoke duct diameter (male)
80mm
Air intake duct diameter (male)
40mm
The heatable room dimensions are calculated on the basis
of pellets with a calorific value of at least 20.2Mj/kg and
home insulation in compliance with Nz regulations. It is also
important to consider the location of the pellet fire in the room
heated.
Please note: External electrical devices may cause interference. Work
related to live parts/components, servicing and/or inspections must be
carried out by qualified staff.
Optional extras
•
Remote Control (cod. N. 254160)
It is possible to buy a remote control to turn the pellet fire
on and off and adjust it remotely.