40
ENGLISH
USER INSTRUCTIONS
INTERFACE
The interface is the display on the remote control. The
views display the functions and are described in the
following sections
REMOTE CONTROL
ON/OFF button
manual on/off button and for switching the remote
from energy saving mode to active heating
Buttons:
+/-
to increase/decrease the set values or scroll
between the Menu options
M
: to access the Menu or activate the Relax mode
OK
: to confirm an operation (2 seconds) or to access
an item on the Menu or to move from Automatic to
Manual Mode and vice versa.
NOTES
• The remote control exchanges information with the
logic board (including room temperature sensing in
automatic mode) every 2’ and when it is activated by
pressing the ON/OFF button.
• In normal use, the remote control’s batteries should
last a year. This duration is for illustrative purposes
only. Edilkamin and the reseller will not consider claims
for battery life under any circumstances. If the battery
charge is low, a warning displays at the top left (see the
paragraph on “If problems arise”).
• Characteristics: RF transceiver module, frequency 2.4
GHz - Powered by two AAA 1.5 V batteries rated at least
1200 mAh. Risk of explosion if the batteries are replaced
with other batteries of an incorrect type.
POWER SAVING ON THE REMOTE CONTROL
If the remote control is not used for 20 min., the display
turns off. This only refers to the remote control, not the
product itself.
To turn the display back on, press the ON/OFF button.
DO NOT PRESS THE ON/OFF BUTTON
REPEATEDLY; otherwise in manual mode,
you may inadvertently switch the product
on and off.
POWERING THE REMOTE CONTROL
• Open the bottom of the remote control and
insert the 2 batteries in the way indicated.
• Supply mains power to the product.
• WHEN YOU HEAR THE AUDIBLE SIGNAL,
PRESS THE ON/OFF BUTTON. Otherwise the
remote control will not work.
THE COMMAND SIGNAL IS CONFIRMED
BY AN AUDIBLE SIGNAL. IF THE AUDIBLE
SIGNAL DOES NOT SOUND, THIS
MEANS THE BUTTON WAS PRESSED
TOO BRIEFLY.
USER
If at the first power on
the language is not set,
the language selection screen will display on the
side. Choose the language with the +/- buttons and
confirm with OK.
ON/OFF
button
