43
ENGLISH
USER INSTRUCTIONS
Fans/ducting
The stove is equipped with three fans, which can be
regulated for speed separately.
They are indicated as fan 1, 2 and 3 and their situation
is shown at the bottom of the remote control display.
Fan 1 always blows air frontally
Fans 2 and 3 can blow air frontally or towards the
ducting.
Setting the Fan
Follow the instructions below to manually regulate the
power levels of fans 1, 2 and 3.
Press “OK” once.
The fan setting is shown on the display, next to the
blade symbol representing the fan.
Set the fan level using the “+” and “-” buttons.
The “blades” fill in to indicate the current setting.
Confirm by pressing the “OK” button for 2 seconds.
First adjust fan 1 and then fan 2.
Fan setting 1 can also follow the power.
To activate this mode, press the + button to above the
maximum fan setting. Letter “A” will appear next to the
“blades” symbol.
Speed 5 of Fan 1 corresponds to “turbo” speed for
“urgent” ducting requirements.
Fan settings 2 and 3 can be increased or decreased
or turned off (fan setting 1) using the +/- buttons as
described above or can follow the power demand
(decrease when the power is decreased or increase
vice versa).
To activate this mode, press the + button to above
the maximum setting. Letter “A” will appear next to the
“blades” symbol.
To ensure that the speed of fans 2 and 3 varies
according to the room temperature demand, contact
the Edilkamin technician, who will be able to fit
dedicated sensors.
THE NUMBER NEXT TO THE “BLADE” OR “FLAME”
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
position 1
“flame”
symbol
“blade”
symbol
Levers
USER
2
3
Bear in mind lever length when placing
ducting pipe, especially if directed
upwards by a bend:
The lever fully pulled in front air position
has in fact a length of 6,5 cm. (1,5 cm. in
ducting position)
The direction of fans 2 and 3 can be regulated using
the levers on the back of the stove: each lever regulates
the direction of the fan on the same side.
Lever backwards =
Air blows frontally, not to the ducting
Example
Fan 2 providing frontal air
Fan 3 ducting warm air
