19
ENGLISH
CERAMIC CLADDING
INSTALLER
Once the metal support has been assembled with the small bracket, place it on the ceramic pieces and apply the
screws and washers but without tightening, as shown in the figure below.
The correct position is the point where the bracket profile meets with the
metal support. Tighten the screws that fix the brackets to the metal profile
*
metal support
Position the small bracket with the cage nut on the metal support and screw on with the supplied M4.2x9.5 screw.
The drawing shows the left side panel (for the location of the small adjustment bracket).
m e t a l
support
screw TE M4x10 (b)
washer D5 (a)
Screw .4.2x9.5 (d)
*
