manualshive.com logo in svg

EdilKamin Blade2 12 Up, Directions For Installation, Use And Maintenance

Share
Download
EdilKamin Blade2 12 Up Directions For Installation, Use And Maintenance Download Page 34

34

ENGLISH

USER INSTRUCTIONS

USER

- FAN ADJUSTMENT

The setting can be made with the stove turned OFF or ON.
If the backlight is switched off, it can be activated by pressing any button.

Then by pressing the button 

 or 

 SET flashes 

and instead of the environment Set, the indication of the 
number of the fan being edited appears (F1). 

The fan speed can be increased or decreased with 

 or 

 in the following sequence:

1 -2 - 3 - 4 - 5 - AUTO - for the front fan (1)

OFF-1-2-3-4-5- AUTO for ducted fans (2 and 3)

with button 

with button 

You can confirm the setting with the  

 button and 

then move to the next fan, if present (only for PLUS 

ducted versions), otherwise you can exit the fan setting 

page and “SET” will stop flashing.
Wait 5" without pressing any button to exit the fan setting, 
and SET will stop flashing.

Summary of Contents for Blade2 12 Up









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands