Edgewater Networks 190 InShore 2014 Series, Owner Assistance Manual

Page: 213 / 214

27
Owner’s Manual
Product Summary/Switch Template
Switch Template
Remove the template from the owner’s
manual by cutting around the dashed
rectangular perimeter line.
Align the 3/16" (.48 cm) drill bit with each
of the four black circles and drill straight
down through the helm, providing
clearance for the mounting hardware
provided with the switch.
Align the centering bit of a 2" (5.08
cm) hole saw with the cross hairs in the
center of the 2" (5.08 cm) dashed circular
perimeter and drill straight down through
the helm, providing additional clearance
for switch and electrical connection.
2" (5.08 cm) hole for
Switch Key Pads
Tactile Switch Connection
Mount control box within 30"
(76.2) of keypad.
Control box wire harness is 30"
(76.2) length
High Performance Tabs - Single & Dual Actuator
• High performance tab kit includes: two 12-volt Extreme Duty Actuators with 316 SS billet
ram with 3/8" (.95 cm) SS bolts, two 7-gauge flat-304 electro-polished stainless blades.
• Full transom back plate with adjustable C-channel, 3/8" (.95 cm) bolts and super duty
hinge with 3/8" (.95 cm) hinge pin
• Actuator extension harnesses sold separately in choice of 5 lengths
• Customer supplied mounting hardware
• Available in sizes: Single Actuator System: #15048-101 (14" x 12"), #15049-101 (18" x 12")
Dual Actuator System : #15050-101 (21" x 14"), #15051-101 (25" x 14")
RT 12x12 NS RT 16x12 HDNS RT 19x14 XDNS
Electro-polished Blades
High Performance Tabs - Single & Dual Actuator
Electro-polished Blades
Switches sold
separately.
See available
options on
page 16