Edgewater Networks 188 Center Console 2014, Owner Assistance Manual

Page: 95 / 177

6-8 Selection Guide
Recommendations made in this publication are guidelines based on
average acceptance of steering effor t.
NOTICE
The Syten components were produced
up until late 1984 when they were
replaced by the SeaStar Steering
systems.Teleflex Canada Limited
Partnership no longer stocks any
replacement par ts, fittings or seal
kits for this steering system or any
component of this system.
NOTICE
Syten Hydraulic Steering
(Obsolete).
Replacing or upgrading from a Syten inboard steering system to
SeaStar Components.
Helms: The Syten helm pump should be replaced with the current
model SeaStar Helm Pump HH5271 and Back mount kit HA5418.
This should be done at each helm station.
Tube: The 5/16 nylon tube and fittings are obsolete and must be
replaced with SeaStar 3/8" nylon extruded tube for all inboard
applications.
Uniflow Valve: U-10 or Model 50: Obsolete, no replacement par ts
are available.
Cylinder : Adapter HA5425 is required for the conversion from a
Syten steering cylinder to a current SeaStar Steering cylinder.