5-23
3.
Unplug the battery connector from JP9 BATTERY. All connectors are “locked” with RTV. Break the
RTV as needed. EdgeTech recommends reapplying RTV when the battery is reinstalled.
Figure 5-3: The Battery Connector Location at JP9
4.
Remove the [2] Screws from Each side of the battery pack. EdgeTech recommends storing the
screws by reinstalling the screws into the Standoffs on the board. Attempting to store the screws
with the battery pack may result in them getting lost.
Figure 5-4: Uninstall the Battery by Removing the Screws in the Stand-offs
Reverse the instructions listed above to Reinstall the Battery
5.1.3.1
Battery Pack Storage Guidelines
The Deck Unit/Battery Packs should be stored at a temperature of approximately 20°C (68°F).
