5-21
SECTION 5:
MAINTENANCE
The 8011M Deck Unit is ruggedly built and therefore requires minimal maintenance. However, there are
a few steps the user can take to prolong the life of the unit.
5.1
Basic Maintenance
The PACS Deck Unit requires basic care to ensure it is fully functional for use. Additional information on
maintaining the PACS Deck Unit, Transducer, and Battery Storage Instructions are listed below.
CAUTION!
Never attempt to ship Portable Topside it in its Storm Case
TM
alone. Shipping Portable Topsides without an exterior shipping crate may
cause damage sensitive internal components and void the warranty.
5.1.1
8011M Deck Unit
•
The Front Panel can be wiped down with a window or CRT cleaner. Do not use solvents.
•
The Batteries should be charged before use.
5.1.2
Transducer
•
The Transducer should be rinsed with fresh water after use.
•
The Transducer connector should be kept clean.
CAUTION!
The 8011M should never be exposed to any liquid while open.
The Deck Unit is only water-resistant when the cover is closed.
5.1.3
Battery Storage
If the 8011M is going to be stored for a prolonged period (over 6 months), the battery pack should, at
minimum, be unplugged. However, EdgeTech recommends removing the battery from the unit and stored
separately. The battery should be discharged to approximately 15.0 volts before storage.
To remove the Battery Pack:
1.
Remove the [10] Screws holding the Front Panel into Pelican Case using a Phillips screwdriver.
