background image

Installation Instructions 

 

You can use the EdgeStar dehumidifier to create a comfortable 
environment and prevent damage caused by moisture to books or 

valuables in areas such as basements or home libraries. Follow the 

instructions below to unpack and set up your unit.  
 

1.

 

Carefully unpack the dehumidifier from its box and packaging 
material, and remove any adhesive tape holding the water 

bucket and filter in place. You may want to save the box for 

storing and transporting the unit. Let the unit sit upright for at least 
24 hours before powering it on to allow the compressor’s fluids to 

settle. 

2.

 

Place the dehumidifier on a level floor or surface that is strong 
enough to support the unit with a full bucket of water in a room 

where the ambient temperature will not drop below 41°F, and 

away from any heat sources such as direct sunlight, heaters, 
radiators, dryers, etc.  

 

Allow at least 10 inches of space all around the unit and at least 20 inches 
of space above the unit.

 

 

If you have multiple power outlets in the room, choose one that is near the 
dehumidifier and that will be able to provide adequate power to the unit. 

See the power requirements listed in the product label located on the 

side, or on the back of your dehumidifier. 
 

3.

 

Close all windows and doors. To be most effective, use the 

dehumidifier in a contained room as opposed to a partitioned 
studio or warehouse type space.  

4.

 

To activate the unit and ensure the warning switches are 

engaged, remove the water bucket and reinstall it; otherwise, the 
unit may not work properly.   

5.

 

Plug the unit in to a grounded outlet. (Read the Safety Information 

section.) 

 

Note

:  

 

Dehumidifiers working 
in a basement will 
have little or no effect 
on adjacent enclosed 
rooms such as closets, 
unless there is enough 
circulation of air in and 
out of the enclosed 
area. 

 

The unit is designed to 
work in environments 

with temperatures 
between 41°F and 95°F 

Caution

:  

This unit is for freestanding, 
indoor use only and will not 
operate correctly if used 
outdoors or if built in under a 
counter or cabinet.   

Summary of Contents for DEP500WP



















Reviews: