28
EDGE -
Item code: BH69
.
Instruction Manual
3. Position the battery pack and receiver
behind the fuel tank. Use the two light plywood
pieces, placed over the battery and receiver
and glue to the fuselage sides to hold the bat-
tery and receiver securely in place. Use 15mm
triangle pieces glued between the fuselage
sides and the plywood pieces to reinforce the
joints.
Do not permanently secure the receiver and
battery until after balancing the model.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Tie wrap.
4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Battery
Receiver