12
EDGE -
Item code: BH69
.
Instruction Manual
Throttle servo
Secure
SERVO INSTALLATION.
ELEVATOR INSTALLATION.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
Servo arm.
Throttle pushrod
Throttle servo
Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
INSTALLING THE THROTTLE PUSHROD.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Secure
Connector.
Cut