Edge Technologies Minuteman 320 SE, Operation Manual

Page: 125 / 222

MINUTEMAN
320
118
REV 13.1:2020
F1 Turning parameter
Setting unit Range Suggested setup
% 0~99 80%
Description:
Setting method:
Note:
Sets the pusher forward torque in automatic with lathe collet closed.
According to material size and in relation with the speed of collet close.
Adjust in small increments to avoid bending of material.
Setting unit Range Suggested setup
% 0~50 30%
Description:
Setting method:
Note:
Sets the pusher forward speed when bar feeder is in manual.
According to material size and weight.
Adjust in small increments to avoid moving material too fast or slow.
Setting too high or low could cause servo motor fault.
Setting unit Range Suggested setup
% 0~100 30%
Description:
Setting method:
Note:
Sets the pusher forward torque when bar feeder is in manual.
According to material size and weight.
Adjust in small increments to avoid moving material too fast or slow.
Setting too high or low could cause servo motor fault.