7
T A B L E O F C O N T E N T S
I n s t a l l a t i o n I n s t r u c t i o n s
E A S
7
I N S T A L L A T I O N I N S T R U C T I O N S
B A C K - U P C A M E R A
IMPORTANT SAFETY INFORMATION
This device should be used as a secondary aid while driving
your vehicle, and should never be used as the sole source of
position information. You must always look behind and to the
sides, and use your mirrors to assist.
The parking lines are for reference only, and may not be ac-
curate when road conditions are not completely level. Never
place complete dependence on these lines when backing up.
!WARNING!
Misuse of this product could lead to injury or death. Obey all
traffi c laws. Read and comply with all information in the CS/
CTS User Guide included with the CTS product.
JUNCTION
CABLE
REVERSE
IMAGE
BUTTON
ADJUST THE ANGLE
1. Use the supplied ALLEN
WRENCH to loosen the camera
lens set screws.
2. Adjust the view up or down,
and re-tighten the set screws.
REVERSE THE IMAGE
1. Simply press the small but-
ton on the JUNCTION CABLE,
and see the image reverses
itself.
FIGURE 12
PARKING LINES
These lines may be used to help
you align your vehicle when
parking or backing up. The
horizontal distance lines are
there to give you a general idea
of how far your are from an ob-
ject. However, this will need to
be calibrated, and is not always
accurate. To do this:
1. Place an object 2 ft away
from the back of your vehicle.
Make sure your vehicle is
parked on fl at, level ground.
2. Loosen each of the set
screws with the provided Allen
wrench.
3. Tilt the camera until the
bottom line (2ft line) is aligned
with the object.
4. Tighten the set screws to
keep the lens in that position.
S A F E T Y
S A F E T Y
