Edge-Core ES4624-SFP, Routing Management Manual, Page: 71 / 256

71
Router ipv6 rip configuration mode
redistribute ospf [<process-tag>]
[metric<value>] [route-map<word>]
no redistribute ospf
[<process-tag>]
To enable or disable redistribution of
OSPFv3 routing for RIPng.
（
2
）
To display configuration information
Command Notes
Admin mode and configuration mode
show ipv6 rip redistribute
To display RIPng routing which is
redistributed from other routing protocols.
（
3
）
Debugging
Command Notes
Admin mode
debug ipv6 rip redistribute
message send
no debug ipv6 rip redistribute
message send
debug ipv6 rip redistribute route
receive
no debug ipv6 rip redistribute route
receive
To enable or disable debugging messages
sent to NSM by RIP(ng) for redistribution of
OSPFv3 routing.
To enable or disable debugging route
messages received from NSM.
1.5.3 Commands For RIPng
1.5.3.1 clear ipv6 route
Command: clear ipv6 rip route { <ipv6-address >| kernel |static | connected |rip |ospf |isis |
bgp |all }
Function: Clear specific route from the RIPng route table
Parameter: Clears the route exactly match with the destination address from the RIP route table
<ipv6-address > is the destination address shown in hex notation with prefix length.
kernel delete kernel route from the RIPng route table
static delete static route from the RIPng route table
connected delete direct route from the RIPng route table
rip delete RIPng route from the RIPng route table only