173
neighbor { <ip-address> | <TAG> } weight
<weight>
no neighbor { <ip-address> | <TAG> }
Configure BGP neighbor weights;
the
no neighbor { <ip-address> |
<TAG> }
command recovers
default weights.
（
5
）
Configure BGP Route Filtering policy based on neighbor
Command
Explanation
Router configuration mode
neighbor {<ip-address>|<TAG>} distribute-list
{<1-199>|<1300-2699>|<WORD>} {in|out}
no neighbor {<ip-address>|<TAG>} distribute-list
{<1-199>|<1300-2699>|<WORD>} {in|out}
Filter neighbor routing
updating information. The
no
neighbor {<ip-address> |
<TAG>} distribute-list
{<1-199> | <1300-2699> |
<WORD>} {in
|
out}
command cancels routing
filter.
（
6
）
Configure Next-Hop
1
）
Set Next-Hop as the switch’s address
Command
Explanation
BGP configuration mode
neighbor {<ip-address> | <TAG>}
next-hop-self
no neighbor {<ip-address> | <TAG>}
next-hop-self
While sending route Next-Hop set
Next-Hop as the switch’s address; the
no
neighbor {<ip-address> | <TAG>}
next-hop-self
command cancels the
setting.
2
）
Cancel default Next-Hop through route map
Command
Explanation
Route mapped configuration command
set ip next-hop <ip-address>
no set ip next-hop
Set the Next-Hop attribute of outbound
route. The
no set ip next-hop
command
cancels this setting.
（
7
）
Configure EGBP Multi-Hop
If the connections with outer neighbors are not direct, the following command can configure
neighbor Multi-Hop.
Command
Explanation