Edge-Core ES3510MA, Management Manual

Page: 538 / 984

C
HAPTER
21
| System Management Commands
SMTP Alerts
– 538 –
E
XAMPLE
Console(config)#logging sendmail host 192.168.1.19
Console(config)#
logging sendmail
level
This command sets the severity threshold used to trigger alert messages.
Use the no form to restore the default setting.
S
YNTAX
logging sendmail level level
no logging sendmail level
level - One of the system message levels ( page 531 ). Messages
sent include the selected level down to level 0. (Range: 0-7;
Default: 7)
D
EFAULT
S
ETTING
Level 7
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The specified level indicates an event threshold. All events at this level or
higher will be sent to the configured email recipients. (For example, using
Level 7 will report all events from level 7 to level 0.)
E
XAMPLE
This example will send email alerts for system errors from level 3 through
0.
Console(config)#logging sendmail level 3
Console(config)#
logging sendmail
destination-email
This command specifies the email recipients of alert messages. Use the no
form to remove a recipient.
S
YNTAX
[ no ] logging sendmail destination-email email-address
email-address - The source email address used in alert messages.
(Range: 1-41 characters)
D
EFAULT
S
ETTING
None