11
This appliance is made of stainless sheet steel and there are risks of cutting
inherent in its design and to being made of thin sheet steel. Please take extra special care
when handling it and cleaning the same.
The screens of the display cabinets with heating can reach considerable
temperatures (max. 48º C in premises at 25º C) and consequently there is a risk of
burns.
Do not allow children to handle the appliance under any circumstances.
MAINTENANCE AND CONSERVATION
ANY TECHNICAL MAINTENANCE MUST BE CARRIED OUT BY
YOUR DISTRIBUTOR’S TECHNICAL ASSISTANCE SERVICE.
CLEANING
In order to clean the appliance it is recommendable to firstly disconnect the same
from the mains electricity supply. Do not splash water on the electric components.
To clean the stainless steel use a sponge or cloth, tepid water and neutral soap.
Do not use abrasive products, solvents, metal cleaning liquids or undiluted detergents.
Dry with a cloth afterwards.
MALFUNCTIONING
Some problems are due to causes that are easily resolved without having to
contact the technical service. Please read the following table carefully:
PROBLEM PROCEDURE
The appliance does not work.
Check that it is correctly connected to the electricity socket and
that the fuses are in good condition and that the automatic
power limiter has not tripped.
The screen does not heat or heats
up very little.
Check the good condition of the fluorescent or the halogen
lamps (depending on the model). If any of them needs to be
replaced we recommend contacting your Technical Assistance
Service.
All the basic checks have been
carried out and the problem
remains.
Contact your distributor or your Technical Assistance Service.
