Ideal Placement
There are several important factors to consider when selecting a location for your
OxiLeaf
®
XL100:
• Make sure the location you choose is as far away from the HVAC air return duct as possible. This will ensure that
the purification produced by the OxiLeaf® XL100 is optimally circulated.
• Place the unit on top of something tall such as a bookcase, a shelf or a mounting bracket, leaving only 12 to 24
inches between the unit and the ceiling.
• To ensure the unit works properly, there should be as much space as possible in front of your OxiLeaf® XL100 so
that it can efficiently process the air in the area.
• Never place an operating unit on the floor.
Initial Setting
Before using the unit you will need to find the area (or square footage) of the room or area you’ll be using it in.
To accurately do this, take into account all connected rooms with open doorways. The purification does not flow
readily through closed doors. The OxiLeaf® XL100 can purify up to 3,000 square feet of space.
Once you have determined an ideal location for your OxiLeaf
®
XL100 and calculated the area of
the environment:
1. Connect the Power Cord into the unit.
2. Insert the Power Plug into the wall outlet.
3. Turn the unit on and set it to NORMAL mode.
4. Leave the unit on NORMAL mode for 9 hours a day for 4 days.
5. After the 4th day, set the unit to HIGH mode and set the square footage to 250 square feet.
6. Gradually increase the square footage setting every 24 hours until you reach the accurate square footage of
your area (which you calculated in the beginning steps). Note: Using the purifier at a setting less than the
square footage of the area being treated is acceptable and may be desirable in an environment relatively free of
pollutants.
Fan Speed Indicator
1. Power Control
2. LCD Screen
3. Fan Speed Setting
Away Mode Timer Indicator
Not for use in occupied room
NOTE
：
lt is recommended to vacate the area for another 2 hours after running the unit in away mode. This allows ozone concentration to settle gradually.
Away Mode Warning Indicator
Replacement Notification Indicator
Maintenance Notification lndicator
Photocatalytic-Oxidation Mode
Indicator
Mode/Coverage Indicator
Mode/Coverage Warning Indicator
4. Maintenance Reset
5. Mode/Coverage Setting
6. Away Mode
Not for use in occupied room
7. Away Mode Timer Indicator
Not for use in occupied room
PERFORM CLEANING
PEPLACE PLATE
REPLACEPCOCELL
Controls
Set-Up
EdenPURE
®
