26
Before cleaning, disconnect the device from the mains. Do not use aggressive or
corrosive detergents as they could damage parts of the steel.
ELECTRICAL INSTALLATION
All installation operations must be carried out by QUALIFIED PERSONNEL according to current
standards.
The manufacturer is not liable for any malfunction due to incorrect installation.
Before installing the machine, connect the power supply cable. To do so, remove the front of the
machine by unscrewing the front screws and pass the cable through the cable grommet and
connect it to the terminal. Then reattach the front of the machine.
The cable outlet is on the back of the device.
The connection terminal is just behind the control panel.
The device must be part of a equipotential bond system. The connection port is on the back,
near the bottom, next to a sign.
The manufacturer is not liable or bound by the warranty in the event of damages caused by
failing to follow the rules or incorrect installation.
Summary of Contents for CV-400
Page 3: ...2 Fig 2 Fig 3...
