3.2.3 Remote control
The remote control is used to activate the various functions of
your alarm center (Deactivating, Activating without delay time,
Activating with delay time, Chime)
The remote control is powered by a Lithium CR2032 type
battery, which under normal conditions, has a life cycle of over
one year.
If the battery is in good condition, the LED on the remote lights
up permane
ntly,
when a key is pressed.
However, if the battery is low, the LED will flash
when a key is pressed.
A Light
B Activation without delay time
G Activating with delay time
D Deactivating
E Chime
3.2.4 Motion detector
Installing the detector
Open the PIR detector by removing the screws and insert the
1.5 volt alkaline batteries (AAA).
Mount the bracket to the wall using the supplied screws and
plugs.
Put the detector on the bracket and secure is with the screw.
Adjust the detector so that it is directed towards the centre of the
room.
LOW BATTERY:
When the detector battery needs to be changed, the detector light flashes every 30
seconds.
Note:
The adjustment button on the detector sensor is not used in alarm configuration.
Less sensitive detector
More sensitive
detector
6
A PROBLEM?
Do not hesitate to call us on our hotline on 0825 560 650.
Our technicians will be happy to help you to refine your installation.
