5. Function Table
Number
sequence to
perform on the
alarm center
Function
Description
1 2 3 4 + 0 1
Triggering mode # 1
The alarm center rings for 30 seconds and then
stops for 45 seconds. This cycle is repeated 10
times
1 2 3 4 + 0 2
Triggering mode # 2
The alarm center remains silent for 45 seconds
and then rings for 30 seconds. This cycle is
repeated 10 times
1 2 3 4 + 0 3
Triggering mode # 3
The alarm center remains silent but dials phone
numbers
1 2 3 4 + 1
Activation without entry
delay time
No entry delay time after detection
1 2 3 4 + 2
G Activating with entry
delay time
Entry delay time of 15 seconds after detection
1 2 3 4 + 3
Test mode
Test of the system (Chime in case of detection)
1 2 3 4 + 4
Deactivation
Deactivates the alarm center
1 2 3 4 + 5
Alarm message
Record the alarm message (6 seconds max.)
1 2 3 4 + 6
Personal code
Changes the personal code
1 2 3 4 + 7
Programming phone
numbers
Saving phone numbers to call in case of alarm
1 2 3 4 + 8
Key tones
Activates or deactivates the beep when you
press keys
1 2 3 4 + 9
Deleting phone numbers
Deletes all phone numbers stored in the alarm
center
1 2 3 4 +
Programming accessories
Programming accessories (12 max.)
1 2 3 4 + #
Deleting of accessories
Clears all accessories stored in the alarm center
NOTE:
1234 is the default code. If you set a personal code, then you have
to use it
9
A PROBLEM?
Do not hesitate to call us on our hotline on 0825 560 650.
Our technicians will be happy to help you to refine your installation.
