Versatrax 100™
Document: UMDT013103.docm
Revision: A10
Created by: KJB
Date: 26 Sep 2019
3070984-A10
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
Page 19 of 41
Us
er
M
an
u
al
Camera & Light Installation
Spectrum 45
The front
Spectrum 45™ (SP45) camera is mounted to the vehicle using M3x12mm flat head screws.
There is a mark at the back of the camera which indicates the top for correct orientation. At the back of
the camera you will find a ring of six screws around the connector holding on the back-end cap. Typically,
only every second screw is installed, leaving the other three screw positions available for mounting the
camera to the vehicle
Additional lighting is provided by two 801 Lights, installed using M3x8mm socket cap screws. Spacers
move the lights forward to beside the camera.
FIGURE 9: SP45 INSTALLATION