Versatrax 100™
Document: UMDT013103.docm
Revision: A10
Created by: KJB
Date: 26 Sep 2019
3070984-A10
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
Page 17 of 41
Us
er
M
an
u
al
Camera Height Adjustment
Camera height is adjusted by loosening the four M5 socket cap screws in the camera slider, moving the
camera to the required height and retightening the screws.
In 12” (300 mm) pipe, the upper adjustment
screws are removed, and lower screws are placed at the top of the slot as illustrated below.
FIGURE 7: CAMERA HEIGHT ADJUSTMENT