2-Function Manipulator
Document: UMDK007857.docm
Revision: A08
Created by:
CWS;PV
Date: 26 Sep 2019
IPN: 3044246-A08
Source Location: C:\ePDM\ISLEng\products\dk-manipulators\manuals\UMDK007857.docm
Page 3 of 15
User Ma
nual
About This Manual
This manual has been prepared to assist you in the operation and maintenance of your Eddyfi
Technologies Inuktun equipment. Correct and prudent operation rests with the operator who must
thoroughly understand the operation, maintenance, service and job requirements. The specifications and
information in this manual are current at the time of printing.
This product is continually being updated and improved. Therefore, this manual is meant to explain and
define the functionality of the product. Furthermore, schematics or pictorials and detailed functionality
may differ slightly from what is described in this manual.
Eddyfi Technologies reserves the right to change and/or amend these specifications at any time without
notice. Customers will be notified of any changes to their equipment.
Information in this manual does not necessarily replace specific regulations, codes, standards, or
requirements of others such as government regulations.
This manual copyright © 2019 by Inuktun Services Ltd. All rights reserved.
Description
The Inuktun 2-Function Manipulator was designed as a deep-sea articulating gripper with an array of
interchangeable jaw sets. The device is capable of high closing forces and provides an additional rotation
feature to position the jaws in relation to the work piece. The pressure compensated housing allows the
manipulator to dive to the depths of the ocean, and anodized aluminum and stainless steel 316 parts and
fasteners allow it to thrive there. Individual jaw set functions are listed below.
Cutter
Cut nearly any material from plastic pipes, natural and synthetic ropes, even electrical
cables.
Trident
For hard to hold objects, the trident grips sample from three equally spaced directions
around the jaw’s axis.
V Jaw
With a wide maw, the V jaw handles large objects with ease.
Parallel
Hard to hold and delicate objects are easily held in the
jaw’s always parallel top and bottom
fingers.
Sampler
Take virtually any type of sample from silt and sediment to sea life and flora.
Specifications
Drive Unit
Maximum Voltage
24VDC
Maximum Continuous Current
1.0A