- 6 -
On
One call is coming in / one call is being made
Flashing ( every 0.1 second)
The unit is being initialized
Flashing (0.1 second on and 2.9 seconds off)
EDW-30T
is connected to the GSM network
Flashing (1 second on and 2 seconds off)
EDW-30T
is not connected to the GSM network
Buttons
Power On/Off Button
To turn on/off
EDW-30T
SOS Button
To make a phone call and/or send an SMS to the preauthorized phone
number.
Press it to receive an incoming call.
Press it to increase volume during conversation.
Call B
To make a phone call and/or send an SMS to the preauthorized phone
number.
Press it to reject a call, cancel calling or complete a conversation.
Call C
To make a phone call and/or send an SMS to the preauthorized phone
number.
Press it to decrease volume during conversation.
Other Connectors
Mini USB
Used for charging, firmware update and configuration on PC.
(USB-to-Serial Adaptor is required for firmware update and
configuration)
SIM Card
To insert SIM card here
Earphone Plug
For connecting earphone
Lanyard Loop
For connecting lanyard.
4.4 First Use
Please read this manual before using your
EDW-30T
.
4.4.1 Ensure that your
EDW-30T
has a working SIM card
installed. - Check that the SIM has not run out of credit (Test
the SIM in a phone to make sure it can send and receive SMS)
- Check that the SIM Lock code is turned off
- If you require the function of sending an SMS location report
to the authorized phone number when it makes a call to the
EDW-30T
, please make sure the SIM installed supports
displaying caller ID.
4.4.2 Charge the battery for at least 3 hours in power-off status
using the wall charger or car charger. Or you can connect the
tracker directly to computer by USB for charging. Red light is on
during charging and off when charging is complete.
4.4.3 Push the Power On/Off button to the ON side and wait for
about 20 seconds. It will then enter standby mode. It is suggested
that you be in an outer place where it can receive better GPS when
you turn on the device.
