- 14 -
Description: Makes the tracker into power down mode when it is inactive for a period of time. In Power
Down states, GPS stops working and GSM enters sleep and stop sending out message until it is activated by
message, incoming calls or triggered by buttons.
Note:
XX=00, to turn off this function.
XX=01~99, to turn on Power Down after a specified period of being inactive. It is in unit of minute.
Example: W000000,026,10
The tracker will enter power down mode after it is inactive for 10 minutes.
14. Initialization
Command: W******,990,099###
Description: This is to make all settings (except for the password) back to factory default.
Note: Turn on the device, press the SOS button for five times continuously and the red LED will be on, and
then send (within 120 seconds) this SMS to the tracker.
### is the ending character and is required in the text message.
Example: W000000,990,099###
15. Password Initialization
Command: W888888,999,666
Description: This is to make the password back to factory default in case you forget your password.
Notes: Turn on the tracker, press the SOS button for five times continuously and the red LED will be on, and
then send this SMS (within 120 seconds) to the tracker to make the password back to factory default
(000000).
Example: W888888,999,666
For more details regarding SMS commands, please go to Annex 1 Command List.
16. Parameter Editor
The tracker can be configured by computer using the Parameter Editor.
GPS Tracker Parameter Editor V1.39
Please refer to <GPS Tracker Parameter Editor> for more information.
