- 17 -
C=0, turn off the function to automatically hang up an incoming call.
C=1, turn on the function to automatically hang up an incoming call after 4 - 5 rings.
D=0, turn off the function of sending an SMS when the tracker is turned on.
D=1, turn on the function of sending an SMS to the authorized phone number for SOS button when the tracker is turned on.
E, defaulted as 1 (the tracker shuts down automatically when the power voltage is lower than 3V).
F=0, turn off the SMS alarm when the tracker enters GPS blind area.
F=1, turn on the SMS alarm when the tracker enters GPS blind area. SMS is to be sent to the authorized phone number for SOS
button.
G=0, all LEDs work normally.
G=1, all LEDs stop flashing when the tracker is working.
H, reserved and defaulted as ‘0’
I, reserved and defaulted as ‘0’
J, reserved and defaulted as ‘1’
### is the ending character
(ABCDEFGHIJ defaulted as 1000100001)
Presetting by SMS for GPRS tracking (Ensure that your SIM card supports GPRS connection prior to setting)
Set Tracker’s GPRS ID
W******,010,ID
W000000,010,00001
Remarks: to set a digital GPRS ID for the tracker.
GPRS ID must not over 14 digits.
Set APN
W******,011,APN,Username,
Password
W000000,011,CMNET,trackingmate,6688
W000000,011,CMNET
Remarks: If no APN username and password are required, just input APN only;
APN defaulted as ‘CMNET’;
APN + us password should not over 39 characters.
Set IP and Port
W******,012,IP,Port
W000000,012, 220.121.7.89,8500
W000000,012,www.trackingmate.com,8500
Remarks: IP is your server’s IP or the domain name. Port: [1,65534]
Set DNS Server IP
W******,009,DNS Server IP
W000000,009,220.23.4.90
Remarks: In case the domain name you set by the last command (W******,012,IP,Port) doesn’t work, which means your
server IP is not properly set. You can first use this command to set DNS Server IP (please check with your DNS server provider
for the DNS Server IP) and then redo the command W******,012,IP,Port.
Enable GPRS Tracking
W******,013,X
W000000,013,1
Remarks:
X=0, to turn off GPRS tracking (default);
X=1, to enable GPRS tracking via TCP
X=2, to enable GPRS tracking via UDP
Set GPRS Interval
W******,014,XXXXX
W000000,014,00060
Remarks: to set time interval for sending GPRS packets.
