EDATA COMMUNICATIONS INC. DSL-2140 Series User Manual Download Page 21

Page: 21 / 80

processing overhead, this method may be advantageous if it is not practical to have a separate

VC for each carried protocol; for example, if charging heavily depends on the number of

simultaneous VCs.

3.3.7 VPI and VCI

Be sure to use the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)

numbers assigned to you. The valid range for the VPI is 0 to 255. The valid range for the VCI is

32 to 65535. 0 to 31 is reserved for local management of ATM traffic.

3.4 Finishing the Wizard

The Quick Start wizard now has all the information it needs. Click on BACK to make

changes or correct mistakes. Click on NEXT to save the current settings. Click on EXIT to exit

the wizard without saving.

Your changes have been saved. Click on CLOSE. The Quick Start wizard window will

close.

Proprietary & Confidential

Page

21 of 80

Revision: V1.0

Jan. 19 2008

Summary of Contents for DSL-2140 Series

















































































Search results

Summary of Contents for DSL-2140 Series

Reviews:

Related manuals for DSL-2140 Series

Brands by name

Popular brands

EDATA COMMUNICATIONS INC. DSL-2140 Series, User Manual

Search results

Summary of Contents for DSL-2140 Series

Reviews:

Related manuals for DSL-2140 Series

Brands by name

Popular brands