2
Quad
pH/mV Amp
How to Use this Manual
This manual describes how to set up and begin using your Quad
Tc/mV Amp. The use of the pH/mV Amp with the Chart software
Thermocouple Calibration extension is discussed. The appendices
provide technical and troubleshooting information.
Checking the Quad Tc/mV Amp
Before you begin working with the Quad Tc/mV Amp, please check
that:
• all items described in the packing list are included; and that
• there are no signs of damage that may have occurred during
transit.
Contact your eDAQ distributor if you encounter a problem.
You should also become familiar with the basic features of your
e-
corder
system, which are discussed in the
e-
corder
Manual
which will
be installed on you hard disk.
eDAQ Amps
The Quad Tc/mV Amp is part of a family of preamplifiers known as
eDAQ Amps.
The Quad
Tc/mV Amp is designed for recording signals from up to four
pH and other potentiometric electrodes. As with other eDAQ Amps, it is
designed to be operated under full software control and is
automatically recognized by Chart or Scope software which controls its
gain range, signal filtering, and other settings.
Summary of Contents for Quad Tc/mV
Page 4: ...iv Quad Tc mV Amp ...
Page 8: ...4 Quad pH mV Amp ...
Page 18: ...14 Quad pH mV Amp ...
Page 22: ...18 Quad Tc mV Amp ...
