6
Quad pH/mV Amp
The Front Panel
The front panel of the Quad Tc/mV Amp is shown in
Figure 2–1
.
The Thermocouple Inputs
The miniature thermocouple input connectors marked ‘Cu’ and ‘+’ of the
Quad Tc/mV Amp provide connection for most types of thermocouple.
The On-line Indicators
When lit, these indicate that the Chart software has located and
initialized the Quad Tc/mV Amp. If the light does not go on when the
software is run, check that the Quad Tc/mV Amp is properly
connected.
Qua
uad Amp
d Amp
Tc/mV
/mV
150
Channel 1
Channel 2
Channel 3
Channel 4
On-line
On-line
On-line
On-line
isolated
Cu
+
Cu
+
Cu
+
Cu
+
On-line indicator
Thermocouple connector
Made in Australia by eDAQ Pty Ltd.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
Input
Output
I C
Bus
I C
2
Channel 4
Channel 3
Channel 2
Channel 1
Temperature signals, BNC connectors
DB–9 pin, I
2
C connectors
Chassis ground, 4 mm post
Figure 2–1
The Quad Tc/mV Amp
front panel
Figure 2–2
The Quad Tc/mV Amp
back panel
Summary of Contents for Quad Tc/mV
Page 4: ...iv Quad Tc mV Amp ...
Page 8: ...4 Quad pH mV Amp ...
Page 18: ...14 Quad pH mV Amp ...
Page 22: ...18 Quad Tc mV Amp ...
