eDAQ e-corder, Manual

Page: 70 / 112

66 eDAQ Potentiostats
With Chart software it also necessary to set up an unused channel
(usually Channel 3) to be the integral of the current signal channel
(usually Channel 1).
With an online function you need to actually be recording data to
obtain the integral. To configure Channel 3 you need to choose the
Computed Input command from the Channel Function pop-up menu,
which opens the Computed Input dialog box
Figure 5–5 . For more
information refer to the Computed Input section in the Chart Software
Manual .
Select Integrate in the Function menu
Figure 5–6
Integration of the current
signal using Scope
Computed Functions.
Figure 5–5
Online integration of the
current signal using
Chart Computed Input
integration