SE-1515 PC ECG User Manual ECG Sampling
- 51 -
When you click
Re-identify
after you have manually adjusted the measurement line, the system
automatically calculates the place of the measurement line of the Q point and J point and their
corresponding ST value and ST slope. The system also refreshes the place of the measurement
line of the Q point and J point every 10s.
1.
single amplified mean wave
You can manage the lead to be displayed by system scan or manual configuration.
2.
multiple original mean waves
In the manual mode, double-click on any mean wave area and the system will automatically
switch to its enlarged display window.
3.
ST baseline
Right-click on the area of a single amplified mean wave or multiple original mean waves and
the system will display the
Accumulate Baseline/Accumulate All
.
Select the
Accumulate Baseline
and the baseline mean wave will be folded up to the
average template of each lead. This operation is only available during the Exercise stage.
Select the
Accumulate All
and the mean wave of all leads will be folded up on the
single amplified mean wave window.
4.4.3.4 ST Trend
On the
ST Trend
screen, the ST run charts of 6 leads are displayed. You can right-click to switch
between lead groups.
4.4.3.5 Sample Setup
Click on
Settings
on the exercise ECG sampling screen, and the
System Setting
window will be
displayed. In the
System Setting
window, click
Sample Setting
to enter the
Sample Setting
window.
In the
Sampling Setting
window, you can
Configure the model, port number, device ID of the sampling box.
Configure the parameters of the filter.
Configure the lead mode, lead sequence, lead electrode, display sequence and QRS voice.
In addition, the lead sequence can be edited.
Select the
Enter the analysis screen when sampling finishes
.
Select the
Auto print when sampling finishes
.
Summary of Contents for SE-1515
Page 1: ......
Page 7: ...VI Appendix 2 EMC Information 99 Appendix 3 Abbreviations 103...
Page 111: ......
