SE-1515 PC ECG User Manual ECG Sampling
- 37 -
Chapter 4 ECG Sampling
Plug in the right sentinel, and double-click
on the screen to start the software. The main
screen will be displayed as follows:
Figure 4-1 Main screen
4.1 Initial Configuration
When the software is started the first time after installation, an
Initial Setting
window will be
displayed, and you can configure parameters such as the hospital name, lead mode, and sequence.
NOTE
: If you need to reinstall the software, reinstall it under the original directory.
Otherwise, you will have to reconfigure it.
4.2 Entering Patient Information
You can enter the patient information with the following two ways:
1.
New Patient
Click
New Patient
on the main screen (Figure 4-1), and the
New Patient
window will be
displayed as follows:
Summary of Contents for SE-1515
Page 1: ......
Page 7: ...VI Appendix 2 EMC Information 99 Appendix 3 Abbreviations 103...
Page 111: ......
